diff --git a/ChangeMirrors.sh b/ChangeMirrors.sh index d009af9..b34338e 100644 --- a/ChangeMirrors.sh +++ b/ChangeMirrors.sh @@ -1,9 +1,46 @@ #!/bin/bash ## Author: SuperManito -## Modified: 2023-05-01 -## License: GPL-2.0 +## Modified: 2023-05-02 +## License: MIT ## Github: https://github.com/SuperManito/LinuxMirrors -## Gitee: https://gitee.com/SuperManito/LinuxMirrors + +## 国内镜像站列表 +# 格式："镜像站名称@镜像站地址" +mirror_list_default=( + "阿里云@mirrors.aliyun.com" + "腾讯云@mirrors.tencent.com" + "华为云@repo.huaweicloud.com" + "网易@mirrors.163.com" + "搜狐@mirrors.sohu.com" + "清华大学@mirrors.tuna.tsinghua.edu.cn" + "北京大学@mirrors.pku.edu.cn" + "浙江大学@mirrors.zju.edu.cn" + "南京大学@mirrors.nju.edu.cn" + "重庆大学@mirrors.cqu.edu.cn" + "兰州大学@mirror.lzu.edu.cn" + "上海交通大学@mirror.sjtu.edu.cn" + "哈尔滨工业大学@mirrors.hit.edu.cn" + "中国科学技术大学@mirrors.ustc.edu.cn" + "中国科学院软件研究所@mirror.iscas.ac.cn" +) + +## 配置需要区分公网地址和内网地址的镜像站（不分地域） +# 配置方法：需要同时在两个数组变量中分别定义镜像站地址，并且保证排列顺序一致 +# 工作原理：当检测到用户所选择的镜像站地址在 “镜像站公网地址列表” 中时就会询问是否切换为内网地址，然后从 “镜像站内网地址列表” 相同的位置提取内网地址 +# 镜像站公网地址列表 +mirror_list_extranet=( + "mirrors.aliyun.com" + "mirrors.tencent.com" + "repo.huaweicloud.com" +) +# 镜像站内网地址列表 +mirror_list_intranet=( + "mirrors.cloud.aliyuncs.com" + "mirrors.tencentyun.com" + "mirrors.myhuaweicloud.com" +) + +############################################################################## ## 定义系统判定变量 SYSTEM_DEBIAN="Debian" @@ -219,7 +256,7 @@ function BackupMirrors() { ## /etc/apt/sources.list if [ -s $File_DebianSourceList ]; then if [ -s $File_DebianSourceListBackup ]; then - local CHOICE_BACKUP1=$(echo -e "\n${BOLD}└─ 检测到系统存在已备份的 list 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") + local CHOICE_BACKUP1=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 list 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") read -p "${CHOICE_BACKUP1}" INPUT [ -z ${INPUT} ] && INPUT=Y case $INPUT in @@ -246,7 +283,7 @@ function BackupMirrors() { ## /etc/apt/sources.list.d if [ -d $Dir_DebianExtendSource ] && [ ${VERIFICATION_FILES} -eq 0 ]; then if [ -d $Dir_DebianExtendSourceBackup ] && [ ${VERIFICATION_BACKUPFILES} -eq 0 ]; then - local CHOICE_BACKUP2=$(echo -e "\n${BOLD}└─ 检测到系统存在已备份的 list 第三方源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") + local CHOICE_BACKUP2=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 list 第三方源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") read -p "${CHOICE_BACKUP2}" INPUT [ -z ${INPUT} ] && INPUT=Y case $INPUT in @@ -272,7 +309,7 @@ function BackupMirrors() { ## /etc/yum.repos.d if [ ${VERIFICATION_FILES} -eq 0 ]; then if [ -d $Dir_RedHatReposBackup ] && [ ${VERIFICATION_BACKUPFILES} -eq 0 ]; then - local CHOICE_BACKUP3=$(echo -e "\n${BOLD}└─ 检测到系统存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") + local CHOICE_BACKUP3=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") read -p "${CHOICE_BACKUP3}" INPUT [ -z ${INPUT} ] && INPUT=Y case $INPUT in @@ -300,7 +337,7 @@ function BackupMirrors() { ## /etc/yum.repos.d if [ ${VERIFICATION_FILES} -eq 0 ]; then if [ -d $Dir_openEulerReposBackup ] && [ ${VERIFICATION_BACKUPFILES} -eq 0 ]; then - local CHOICE_BACKUP4=$(echo -e "\n${BOLD}└─ 检测到系统存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") + local CHOICE_BACKUP4=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") read -p "${CHOICE_BACKUP4}" INPUT [ -z ${INPUT} ] && INPUT=Y case $INPUT in @@ -328,7 +365,7 @@ function BackupMirrors() { ## /etc/zypp/repos.d if [ ${VERIFICATION_FILES} -eq 0 ]; then if [ -d $Dir_openSUSEReposBackup ] && [ ${VERIFICATION_BACKUPFILES} -eq 0 ]; then - local CHOICE_BACKUP4=$(echo -e "\n${BOLD}└─ 检测到系统存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") + local CHOICE_BACKUP4=$(echo -e "\n${BOLD}└─ 检测到系统中存在已备份的 repo 源文件，是否跳过覆盖备份? [Y/n] ${PLAIN}") read -p "${CHOICE_BACKUP4}" INPUT [ -z ${INPUT} ] && INPUT=Y case $INPUT in @@ -476,47 +513,63 @@ function UpgradeSoftware() { esac } -## 更换基于 Debian 系 Linux 发行版的国内源 +## 更换基于 Debian 系 Linux 发行版的软件源 function DebianMirrors() { - ## 修改国内源 + local source_suffix + local TIPS="## 默认禁用源码镜像以提高速度，如需启用请自行取消注释" + local basic_url="${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}" case "${SYSTEM_JUDGMENT}" in - "${SYSTEM_UBUNTU}") - echo "## 默认禁用源码镜像以提高速度，如需启用请自行取消注释 -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME} main restricted universe multiverse -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME} main restricted universe multiverse -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-security main restricted universe multiverse -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-security main restricted universe multiverse -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-updates main restricted universe multiverse -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-updates main restricted universe multiverse -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-backports main restricted universe multiverse -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-backports main restricted universe multiverse - -## 预发布软件源（不建议启用） -# deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-proposed main restricted universe multiverse -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-proposed main restricted universe multiverse" >>$File_DebianSourceList - ;; "${SYSTEM_DEBIAN}") - echo "## 默认禁用源码镜像以提高速度，如需启用请自行取消注释 -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME} main contrib non-free -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME} main contrib non-free -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-updates main contrib non-free -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-updates main contrib non-free -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-backports main contrib non-free -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME}-backports main contrib non-free + case "${SYSTEM_VERSION_NUMBER}" in + 12) + source_suffix="main contrib non-free non-free-firmware" + ;; + *) + source_suffix="main contrib non-free" + ;; + esac + echo "${TIPS} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME} ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME} ${source_suffix} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME}-updates ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME}-updates ${source_suffix} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME}-backports ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME}-backports ${source_suffix} +deb ${basic_url}-security ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} +# deb-src ${basic_url}-security ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} + +# deb https://security.debian.org/debian-security ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} +# # deb-src https://security.debian.org/debian-security ${SYSTEM_VERSION_CODENAME}-security ${source_suffix}" >>$File_DebianSourceList + ;; + "${SYSTEM_UBUNTU}") + source_suffix="main restricted universe multiverse" + echo "${TIPS} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME} ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME} ${source_suffix} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME}-updates ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME}-updates ${source_suffix} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME}-backports ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME}-backports ${source_suffix} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} + +# deb http://security.ubuntu.com/ubuntu ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} +# # deb-src http://security.ubuntu.com/ubuntu ${SYSTEM_VERSION_CODENAME}-security ${source_suffix} ## 预发布软件源（不建议启用） -# deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}-security ${SYSTEM_VERSION_CODENAME}/updates main contrib non-free -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH}-security ${SYSTEM_VERSION_CODENAME}/updates main contrib non-free" >>$File_DebianSourceList +# deb ${basic_url} ${SYSTEM_VERSION_CODENAME}-proposed ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME}-proposed ${source_suffix}" >>$File_DebianSourceList ;; "${SYSTEM_KALI}") - echo "## 默认禁用源码镜像以提高速度，如需启用请自行取消注释 -deb ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME} main non-free contrib -# deb-src ${WEB_PROTOCOL}://${SOURCE}/${SOURCE_BRANCH} ${SYSTEM_VERSION_CODENAME} main non-free contrib" >>$File_DebianSourceList + source_suffix="main non-free contrib" + echo "${TIPS} +deb ${basic_url} ${SYSTEM_VERSION_CODENAME} ${source_suffix} +# deb-src ${basic_url} ${SYSTEM_VERSION_CODENAME} ${source_suffix}" >>$File_DebianSourceList ;; esac } -## 更换基于 RedHat 系 Linux 发行版的国内源 +## 更换基于 RedHat 系 Linux 发行版软件源 function RedHatMirrors() { ## 生成基于 RedHat 发行版和及其衍生发行版的官方 repo 源文件 case "${SYSTEM_JUDGMENT}" in @@ -663,7 +716,7 @@ function RedHatMirrors() { esac } -## 更换基于 openEuler 系 Linux 发行版的国内源 +## 更换基于 openEuler 系 Linux 发行版的软件源 function openEulerMirrors() { GenRepoFiles_openEuler cd $Dir_openEulerRepos @@ -674,7 +727,7 @@ function openEulerMirrors() { sed -i "s|repo.openeuler.org|${SOURCE}/${SOURCE_BRANCH}|g" openEuler.repo } -## 更换基于 openSUSE 系 Linux 发行版的国内源 +## 更换基于 openSUSE 系 Linux 发行版的软件源 function openSUSEMirrors() { case "${SYSTEM_ID}" in "opensuse-leap") @@ -750,7 +803,7 @@ function ChooseInstallEPEL() { VERIFICATION_EPELBACKUPFILES=$? if [ ${VERIFICATION_EPEL} -eq 0 ]; then - local CHOICE=$(echo -e "\n ${BOLD}└─ 检测到系统已安装 EPEL 附加软件包，是否替换/覆盖为国内源? [Y/n] ${PLAIN}") + local CHOICE=$(echo -e "\n ${BOLD}└─ 检测到系统已安装 EPEL 附加软件包，是否替换/覆盖软件源? [Y/n] ${PLAIN}") else local CHOICE=$(echo -e "\n ${BOLD}└─ 是否安装 EPEL 附加软件包? [Y/n] ${PLAIN}") fi @@ -772,17 +825,17 @@ function ChooseInstallEPEL() { esac } -## 安装/更换基于 RHEL/CentOS 等红帽系 Linux 的 EPEL (Extra Packages for Enterprise Linux) 附加软件包国内源 +## 安装/更换 EPEL (Extra Packages for Enterprise Linux) 附加软件包软件源 function EPELMirrors() { ## 安装 EPEL 软件包 if [ ${VERIFICATION_EPEL} -ne 0 ]; then echo -e "\n${WORKING} 安装 epel-release 软件包...\n" yum install -y https://mirrors.cloud.tencent.com/epel/epel-release-latest-${SYSTEM_VERSION_NUMBER:0:1}.noarch.rpm fi - ## 删除原有 EPEL 附加软件包 repo 源文件 + ## 删除原有 repo 源文件 [ ${VERIFICATION_EPELFILES} -eq 0 ] && rm -rf $Dir_RedHatRepos/epel* [ ${VERIFICATION_EPELBACKUPFILES} -eq 0 ] && rm -rf $Dir_RedHatReposBackup/epel* - ## 生成官方 EPEL 附加软件包 repo 源文件 + ## 生成 repo 源文件 GenRepoFiles_EPEL sed -i 's|^metalink=|#metalink=|g' $Dir_RedHatRepos/epel* @@ -809,136 +862,132 @@ function EPELMirrors() { rm -rf $Dir_RedHatRepos/epel*rpmnew } -## 选择国内源 +## 选择软件源 function ChooseMirrors() { - ## 云计算厂商的软件源 - # 分外网（公网）地址和内网地址，内网地址仅面向云计算厂商云服务器用户使用 - # 内网地址不支持使用 HTTPS 协议 - function Cloud_Computing_Vendors_Mirrors() { - local Extranet Intranet - ## 公网地址 - case $1 in - 1) - Extranet="mirrors.aliyun.com" - ;; - 2) - Extranet="mirrors.tencent.com" - ;; - 3) - Extranet="repo.huaweicloud.com" - ;; - esac - ## 内网地址 - case $1 in - 1) - Intranet="mirrors.cloud.aliyuncs.com" - ;; - 2) - Intranet="mirrors.tencentyun.com" - ;; - 3) - Intranet="mirrors.myhuaweicloud.com" - ;; - esac + ## 打印软件源/镜像站列表 + function PrintMirrorsList() { + local tmp_mirror_name tmp_mirror_url arr_num default_mirror_name_length tmp_mirror_name_length tmp_spaces_nums i j - CHOICE_A_TMP=$(echo -e "\n ${BOLD}└─ 默认使用镜像站的公网地址，是否继续? [Y/n] ${PLAIN}") - read -p "${CHOICE_A_TMP}" INPUT + ## 计算字符串长度 + function StringLength() { + local text=$1 + echo "${#text}" + } + + local list_arr=($(eval echo \${$1[*]})) + if [ -x /usr/bin/printf ]; then + for ((i = 0; i < ${#list_arr[@]}; i++)); do + tmp_mirror_name=$(echo ${list_arr[i]} | awk -F '@' '{print$1}') # 镜像站名称 + # tmp_mirror_url=$(echo ${list_arr[i]} | awk -F '@' '{print$2}') # 镜像站地址 + + arr_num=$((i + 1)) + default_mirror_name_length=${2:-"30"} # 默认镜像站名称打印长度 + ## 补齐长度差异（中文的引号在等宽字体中占1格而非2格） + [[ $(echo "${tmp_mirror_name}" | grep -c "“") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "“") + [[ $(echo "${tmp_mirror_name}" | grep -c "”") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "”") + [[ $(echo "${tmp_mirror_name}" | grep -c "‘") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "‘") + [[ $(echo "${tmp_mirror_name}" | grep -c "’") -gt 0 ]] && let default_mirror_name_length+=$(echo "${tmp_mirror_name}" | grep -c "’") + tmp_mirror_name_length=$(StringLength $(echo "${tmp_mirror_name}" | sed "s| ||g" | sed "s|[0-9a-zA-Z\.\=\:\_\(\)\'\"-\/\!]||g;")) + ## 填充空格 + tmp_spaces_nums=$(($(($default_mirror_name_length - ${tmp_mirror_name_length} - $(StringLength "${tmp_mirror_name}"))) / 2)) + for ((j = 1; j <= ${tmp_spaces_nums}; j++)); do + tmp_mirror_name="${tmp_mirror_name} " + done + printf " ❖ %-$(($default_mirror_name_length + ${tmp_mirror_name_length}))s %4s\n" "${tmp_mirror_name}" "$arr_num)" + done + else + for ((i = 0; i < ${#list_arr[@]}; i++)); do + tmp_mirror_name=$(echo ${list_arr[i]} | awk -F '@' '{print$1}') # 镜像站名称 + tmp_mirror_url=$(echo ${list_arr[i]} | awk -F '@' '{print$2}') # 镜像站地址 + arr_num=$((i + 1)) + echo -e " ❖ $arr_num. ${tmp_mirror_url} | ${tmp_mirror_name}" + done + fi + } + + ## 选择镜像站内网地址 + # 部分云计算厂商的镜像站区分外网（公网）地址和内网地址，内网地址仅面向云计算厂商云服务器用户使用 + # 内网地址一般不支持使用 HTTPS 协议，所以默认设置为 HTTP 协议 + function ChooseMirrorIntranetAddress() { + local CHOICE=$(echo -e "\n ${BOLD}└─ 默认使用镜像站的公网地址，是否继续? [Y/n] ${PLAIN}") + read -p "${CHOICE}" INPUT [ -z ${INPUT} ] && INPUT=Y case $INPUT in - [Yy] | [Yy][Ee][Ss]) - SOURCE=${Extranet} - ;; + [Yy] | [Yy][Ee][Ss]) ;; [Nn] | [Nn][Oo]) - SOURCE=${Intranet} - echo -e "\n $WARN 已切换至云计算厂商镜像站的内网访问地址，仅限对应厂商云服务器用户使用！" - ONLY_HTTP="True" + for ((i = 0; i < ${#mirror_list_extranet[@]}; i++)); do + if [[ "${SOURCE}" == "${mirror_list_extranet[i]}" ]]; then + # echo "${SOURCE}" + SOURCE="${mirror_list_intranet[i]}" + # echo "${SOURCE}" + # exit + echo -e "\n $WARN 已切换至内网专用地址，仅限在特定环境下使用！" + ONLY_HTTP="True" + break + else + continue + fi + done ;; *) SOURCE=${Extranet} - echo -e "\n$WARN 输入错误，默认使用公网地址！" + echo -e "\n$WARN 输入错误，默认不使用内网地址！" ;; esac } function WelcomeTitle() { - echo -e '+-------------------------------------+' - echo -e '| |' - echo -e '| 欢迎使用 Linux 一键更换国内软件源 |' - echo -e '| |' - echo -e '+-------------------------------------+' + local system_name="${SYSTEM_PRETTY_NAME:-"${SYSTEM_NAME} ${SYSTEM_VERSION_NUMBER}"}" + local arch="${SYSTEM_ARCH}" + local date="$(date "+%Y-%m-%d %H:%M:%S")" + local timezone="$(timedatectl status 2>/dev/null | grep "Time zone" | awk -F ':' '{print$2}' | awk -F ' ' '{print$1}')" + + echo -e '+-----------------------------------------+' + echo -e '| |' + echo -e '| LinuxMirrors MIT |' + echo -e '| |' + echo -e '| 欢迎使用 GNU/Linux 一键更换软件源脚本 |' + echo -e '| |' + echo -e '+-----------------------------------------+' echo -e '' - echo -e " 运行环境 ${BLUE}${SYSTEM_PRETTY_NAME:-"${SYSTEM_NAME} ${SYSTEM_VERSION_NUMBER}"} ${SYSTEM_ARCH}${PLAIN}" - echo -e " 系统时间 ${BLUE}$(date "+%Y-%m-%d %H:%M:%S") $(timedatectl status | grep "Time zone" | awk -F ':' '{print$2}' | awk -F ' ' '{print$1}')${PLAIN}" + echo -e " 运行环境 ${BLUE}${system_name} ${arch}${PLAIN}" + echo -e " 系统时间 ${BLUE}${date} ${timezone}${PLAIN}" echo -e '' } clear WelcomeTitle + if [ -z ${SOURCE} ]; then + local mirror_list_name="mirror_list_default" + PrintMirrorsList "${mirror_list_name}" 31 - echo -e ' ❖ 阿里云 1)' - echo -e ' ❖ 腾讯云 2)' - echo -e ' ❖ 华为云 3)' - echo -e ' ❖ 网易 4)' - echo -e ' ❖ 搜狐 5)' - echo -e ' ❖ 清华大学 6)' - echo -e ' ❖ 北京大学 7)' - echo -e ' ❖ 浙江大学 8)' - echo -e ' ❖ 南京大学 9)' - echo -e ' ❖ 重庆大学 10)' - echo -e ' ❖ 兰州大学 11)' - echo -e ' ❖ 上海交通大学 12)' - echo -e ' ❖ 哈尔滨工业大学 13)' - echo -e ' ❖ 中国科学技术大学 14)' - echo -e ' ❖ 中国科学院软件研究所 15)' - local CHOICE=$(echo -e "\n${BOLD}└─ 请选择并输入你想使用的软件源 [ 1-15 ]：${PLAIN}") - read -p "${CHOICE}" INPUT - case $INPUT in - 1 | 2 | 3) - Cloud_Computing_Vendors_Mirrors $INPUT - ;; - 4) - SOURCE="mirrors.163.com" - ;; - 5) - SOURCE="mirrors.sohu.com" - ;; - 6) - SOURCE="mirrors.tuna.tsinghua.edu.cn" - ;; - 7) - SOURCE="mirrors.pku.edu.cn" - ;; - 8) - SOURCE="mirrors.zju.edu.cn" - ;; - 9) - SOURCE="mirrors.nju.edu.cn" - ;; - 10) - SOURCE="mirrors.cqu.edu.cn" - ;; - 11) - SOURCE="mirror.lzu.edu.cn" - ;; - 12) - SOURCE="mirror.sjtu.edu.cn" - ;; - 13) - SOURCE="mirrors.hit.edu.cn" - ;; - 14) - SOURCE="mirrors.ustc.edu.cn" - ;; - 15) - SOURCE="mirror.iscas.ac.cn" - ;; - *) - SOURCE="mirrors.aliyun.com" - echo -e "\n$WARN 输入错误，将默认使用 ${BLUE}阿里云${PLAIN} 作为国内源！" - sleep 2s - ;; - esac + local CHOICE=$(echo -e "\n${BOLD}└─ 请选择并输入你想使用的软件源 [ 1-$(eval echo \${#$mirror_list_name[@]}) ]：${PLAIN}") + while true; do + read -p "${CHOICE}" INPUT + case $INPUT in + [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) + local tmp_source="$(eval echo \${${mirror_list_name}[$(($INPUT - 1))]})" + if [ -z $tmp_source ]; then + echo -e "\n$WARN 请输入有效的数字序号！" + else + SOURCE="$(eval echo \${${mirror_list_name}[$(($INPUT - 1))]} | awk -F '@' '{print$2}')" + # echo "${SOURCE}" + # exit + break + fi + ;; + *) + echo -e "\n$WARN 请输入数字序号以选择你想使用的软件源！" + ;; + esac + done + + ## 选择镜像站内网地址 + if [[ "${mirror_list_extranet[*]}" =~ (^|[^[:alpha:]])"${SOURCE}"([^[:alpha:]]|$) ]]; then + ChooseMirrorIntranetAddress + fi + fi } ## 选择同步软件源所使用的 WEB 协议（ HTTP：80 端口，HTTPS：443 端口） diff --git a/DockerInstallation.sh b/DockerInstallation.sh index 49c60ea..bf5e6f9 100644 --- a/DockerInstallation.sh +++ b/DockerInstallation.sh @@ -1,9 +1,8 @@ #!/bin/bash ## Author: SuperManito -## Modified: 2023-05-01 -## License: GPL-2.0 +## Modified: 2023-05-02 +## License: MIT ## Github: https://github.com/SuperManito/LinuxMirrors -## Gitee: https://gitee.com/SuperManito/LinuxMirrors function AuthorSignature() { echo -e "\n$COMPLETE 脚本执行结束\n" @@ -471,14 +470,19 @@ function ShowVersion() { function ChooseMirrors() { function WelcomeTitle() { + local system_name="${SYSTEM_PRETTY_NAME:-"${SYSTEM_NAME} ${SYSTEM_VERSION_NUMBER}"}" + local arch="${SYSTEM_ARCH}" + local date="$(date "+%Y-%m-%d %H:%M:%S")" + local timezone="$(timedatectl status 2>/dev/null | grep "Time zone" | awk -F ':' '{print$2}' | awk -F ' ' '{print$1}')" + echo -e '+------------------------------------+' echo -e '| |' echo -e '| 欢迎使用 Docker 一键安装脚本 |' echo -e '| |' echo -e '+------------------------------------+' echo -e '' - echo -e " 运行环境 ${BLUE}${SYSTEM_PRETTY_NAME:-"${SYSTEM_NAME} ${SYSTEM_VERSION_NUMBER}"} ${SYSTEM_ARCH}${PLAIN}" - echo -e " 系统时间 ${BLUE}$(date "+%Y-%m-%d %H:%M:%S") $(timedatectl status | grep "Time zone" | awk -F ':' '{print$2}' | awk -F ' ' '{print$1}')${PLAIN}" + echo -e " 运行环境 ${BLUE}${system_name} ${arch}${PLAIN}" + echo -e " 系统时间 ${BLUE}${date} ${timezone}${PLAIN}" echo -e '' } clear diff --git a/LICENSE b/LICENSE index d159169..12121ae 100644 --- a/LICENSE +++ b/LICENSE @@ -1,339 +1,21 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 +MIT License - Copyright (C) 1989, 1991 Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. +Copyright (c) 2023 SuperManito - Preamble +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Lesser General Public License instead.) You can apply it to -your programs, too. +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -convey the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this -when it starts in an interactive mode: - - Gnomovision version 69, Copyright (C) year name of author - Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may -be called something other than `show w' and `show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the program - `Gnomovision' (which makes passes at compilers) written by James Hacker. - - , 1 April 1989 - Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/README.md b/README.md index 71202be..bada941 100644 --- a/README.md +++ b/README.md @@ -1,8 +1,7 @@ # ![LinuxMirrors](./docs/img/logo.png) -- __GNU/Linux 一键更换国内软件源脚本__ +- __GNU/Linux 一键更换系统软件源脚本__ - __本项目旨在为从事计算机相关行业的朋友们提供便利__ -- __理论支持所有架构的环境，ARM64 环境已经过测试__ *** @@ -14,11 +13,11 @@  Debian - 8.0 ~ 11 + 8.0 ~ 12  Ubuntu - 16.04 ~ 23 + 14.04 ~ 23  Kali Linux @@ -54,7 +53,7 @@ - 当前支持上述基于 Debian、RedHat、openEuler、openSUSE 的发行版和及其部分衍生版本，不再此支持范围内的操作系统请勿运行本脚本 + 当前支持上述基于 Debian、RedHat、openEuler、openSUSE 的发行版和及其部分衍生版本（点击列表中的图标可快速前往其官网），理论支持所有架构的环境，不在此支持范围内的操作系统或版本请勿运行本脚本 - ### 使用方法 @@ -65,42 +64,41 @@ - #### 注意事项 1. 完整复制上面的命令到终端按回车键即可执行，若无法安装 `curl` 软件包可复制源码到本地后通过 `bash` 手动执行 - 2. 为了适配所有环境，需要使用 `Root` 用户执行脚本，切换命令为 `su root` ，如遇报错请查看常见问题与帮助 + 2. 为了适配所有环境，需要使用 `Root` 用户执行脚本，切换命令为 `su root`，如遇报错请查看常见问题与帮助 3. 如果您使用的环境没有安装或不支持简体中文环境，请通过 `SSH客户端工具` 使用，否则将无法正确选择交互内容 4. 执行脚本过程中会自动备份原有源无需手动备份，期间会在终端输出多个主观选择交互内容，可按回车键快速确定 5. 脚本支持在原有源配置错误或者不存在的情况下使用，并且可以重复使用；脚本变更的软件源默认使用 `HTTP` 协议
- > __未启用的源：__ - > _Debian 系 Linux 默认禁用了**源码仓库**和**预发布软件源**，若需启用请将 `/etc/apt/sources.list` 文件中相关内容的所在行**取消注释**_ - > _RedHat 系 Linux 部分仓库**默认没有启用**，若需启用请将 `/etc/yum.repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1`_ - > _openEuler 系 Linux 部分仓库**默认没有启用**，若需启用请将 `/etc/yum.repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1`_ - > _openSUSE 系 Linux 部分仓库**默认没有启用**，若需启用请将 `/etc/zypp/repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1`_ + > __未启用的软件源：__ + > _Debian 系 Linux 默认禁用了源码仓库和预发布软件源，若需启用请将 `/etc/apt/sources.list` 文件中相关内容的所在行取消注释_ + > _RedHat/openEuler 系 Linux 部分仓库默认没有启用，若需启用请将 `/etc/yum.repos.d` 目录下相关 repo 文件中的 `enabled` 值修改为 `1`_ + > _openSUSE 系 Linux 部分仓库默认没有启用，若需启用请将 `/etc/zypp/repos.d` 目录下相关 repo 文件中的 `enabled` 值修改为 `1`_ - #### 软件源 - | | 镜像站名称 | 镜像站地址 | IPv6 | Kali Linux | Rocky Linux | Fedora | openEuler | openSUSE | EPEL | - | :---: | :---------------: | :------------------------------------------------------------------: | :---: | :--------: | :---------: | :----: | :-------: | :------: | :---: | - | 1 | 阿里云 | [mirrors.aliyun.com](https://mirrors.aliyun.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | - | 2 | 腾讯云 | [mirrors.tencent.com](https://mirrors.tencent.com) | ✓ | ✓ | ✓ | ✓ | | ✓ | ✓ | - | 3 | 华为云 | [mirrors.huaweicloud.com](https://mirrors.huaweicloud.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | - | 4 | 网易 | [mirrors.163.com](https://mirrors.163.com) | | | ✓ | ✓ | ✓ | | | - | 5 | 搜狐 | [mirrors.sohu.com](https://mirrors.sohu.com) | | | | ✓ | | ✓ | | - | 6 | 清华大学 | [mirrors.tuna.tsinghua.edu.cn](https://mirrors.tuna.tsinghua.edu.cn) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | - | 7 | 北京大学 | [mirrors.pku.edu.cn](https://mirrors.pku.edu.cn/Mirrors) | ✓ | | | | ✓ | ✓ | ✓ | - | 8 | 浙江大学 | [mirrors.zju.edu.cn](https://mirrors.zju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 9 | 南京大学 | [mirrors.nju.edu.cn](https://mirrors.nju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 10 | 重庆大学 | [mirrors.cqu.edu.cn](https://mirrors.cqu.edu.cn) | | ✓ | | ✓ | | ✓ | ✓ | - | 11 | 兰州大学 | [mirror.lzu.edu.cn](https://mirror.lzu.edu.cn) | ✓ | | ✓ | ✓ | ✓ | ✓ | ✓ | - | 12 | 上海交通大学 | [mirror.sjtu.edu.cn](https://mirror.sjtu.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 13 | 哈尔滨工业大学 | [mirrors.hit.edu.cn](https://mirrors.hit.edu.cn) | ✓ | ✓ | | | ✓ | ✓ | ✓ | - | 14 | 中国科学技术大学 | [mirrors.ustc.edu.cn](https://mirrors.ustc.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 15 | 中国科学院软件研究所 | [mirror.iscas.ac.cn](https://mirror.iscas.ac.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | | 镜像站名称 | 镜像站地址 | IPv6 | Kali | Rocky | Fedora | openEuler | openSUSE | EPEL | + | :---: | :---------------: | :------------------------------------------------------------------: | :--: | :--: | :---: | :----: | :-------: | :------: | :--: | + | 1 | 阿里云 | [mirrors.aliyun.com](https://mirrors.aliyun.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | + | 2 | 腾讯云 | [mirrors.tencent.com](https://mirrors.tencent.com) | ✓ | ✓ | ✓ | ✓ | | ✓ | ✓ | + | 3 | 华为云 | [mirrors.huaweicloud.com](https://mirrors.huaweicloud.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | + | 4 | 网易 | [mirrors.163.com](https://mirrors.163.com) | | | ✓ | ✓ | ✓ | | | + | 5 | 搜狐 | [mirrors.sohu.com](https://mirrors.sohu.com) | | | | ✓ | | ✓ | | + | 6 | 清华大学 | [mirrors.tuna.tsinghua.edu.cn](https://mirrors.tuna.tsinghua.edu.cn) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | + | 7 | 北京大学 | [mirrors.pku.edu.cn](https://mirrors.pku.edu.cn/Mirrors) | ✓ | | | | ✓ | ✓ | ✓ | + | 8 | 浙江大学 | [mirrors.zju.edu.cn](https://mirrors.zju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 9 | 南京大学 | [mirrors.nju.edu.cn](https://mirrors.nju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 10 | 重庆大学 | [mirrors.cqu.edu.cn](https://mirrors.cqu.edu.cn) | | ✓ | | ✓ | | ✓ | ✓ | + | 11 | 兰州大学 | [mirror.lzu.edu.cn](https://mirror.lzu.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 12 | 上海交通大学 | [mirror.sjtu.edu.cn](https://mirror.sjtu.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 13 | 哈尔滨工业大学 | [mirrors.hit.edu.cn](https://mirrors.hit.edu.cn) | ✓ | ✓ | | | ✓ | ✓ | ✓ | + | 14 | 中国科学技术大学 | [mirrors.ustc.edu.cn](https://mirrors.ustc.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 15 | 中国科学院软件研究所 | [mirror.iscas.ac.cn](https://mirror.iscas.ac.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - 以上为脚本当前使用的开源镜像站，所有镜像站均支持 `Debian` `Ubuntu` `CentOS` 软件源 + 以上为脚本默认使用的镜像站，上述所有镜像站均支持 `Debian` `Ubuntu` `CentOS` 软件源，列表根据单位性质、地理位置、名称长度进行排序，与实际速度无关 + 华北地区建议优先使用 `中科大`、`腾讯云`、`清华大学`，软件源的速度区分刷新速度和下载速度，具体请结合实际地理位置进行选择尝试 如果使用过程中脚本不能正常输出中文内容则可对照此列表使用，顺序与脚本一致，之后一路回车即可 - 华北地区建议优先使用 `中科大`、`腾讯云`、`清华大学`，软件源的速度区分刷新速度和下载速度，具体请结合实际地理位置进行选择尝试 - #### 常见问题与帮助 @@ -140,13 +138,13 @@ - #### 脚本执行流程 - - └ 选择国内源 `交互` - - └ 检测如果是 RHEL或CentOS 系统选择是否安装/覆盖 EPEL 扩展国内源 `交互` + - └ 选择软件源 `交互` + - └ 检测如果是红帽系Linux选择是否安装/覆盖 EPEL 扩展软件源 `交互` - └ 选择软件源使用的 WEB 协议 `交互` - └ 检测 防火墙 和 SELINUX 如果开启并且系统是 RHEL或CentOS 选择是否关闭 `交互` - └ 备份原有源 - └ 检测如果存在重复的备份文件选择是否覆盖 `交互` - - └ 更换国内源 + - └ 更换软件源 - └ 选择是否更新软件包 `交互` - └ 选择是否清理已下载的软件包缓存 `交互` @@ -164,15 +162,15 @@ `Docker Hub` Docker Hub 镜像仓库，默认为官方提供的公共库，用于切换下载镜像时的来源仓库，又称镜像加速器 > __注意：__ - > 脚本集成安装 `Docker Engine`，可手动选择安装版本和下载源，还可手动选择镜像加速器，支持国内外服务器环境和 `ARM`架构处理器环境使用。 + > 脚本集成安装 `Docker Engine`，可手动选择安装版本和下载源，还可手动选择镜像加速器，支持海内外服务器环境和 `ARM`架构处理器环境使用。 *** ### LICENSE -Copyright © 2023, [SuperManito](https://github.com/SuperManito). Released under the [GPL-2.0](https://github.com/SuperManito/LinuxMirrors/blob/main/LICENSE). +Copyright © 2023, [SuperManito](https://github.com/SuperManito). Released under the [MIT](https://github.com/SuperManito/LinuxMirrors/blob/main/LICENSE). -项目已设立开源许可协议，传播时需在显著位置标注来源和作者，请尊重作者的知识成果 -建议通过命令直接调用脚本，如有意见与建议您可以提交至 [Issues](https://github.com/SuperManito/LinuxMirrors/issues) +项目已设立开源许可协议，传播时请在显著位置标注来源和作者，请尊重作者的知识成果，建议通过命令直接调用脚本 +如有意见与建议您可以提交至 [Issues](https://github.com/SuperManito/LinuxMirrors/issues)，如果您需要提交您的代码，请前往 GitHub 仓库提交 [Pull Requests](https://github.com/SuperManito/LinuxMirrors/pulls) __如果您觉得这个项目不错对您有所帮助的话，方便在右上角给颗 ⭐ 并分享给更多的朋友吗？__ \ No newline at end of file diff --git a/docs/README.md b/docs/README.md index 6c85be3..85e8432 100644 --- a/docs/README.md +++ b/docs/README.md @@ -1,8 +1,7 @@ ![](./img/logo.png) -- #### __GNU/Linux 一键更换国内软件源脚本__ +- #### __GNU/Linux 一键更换系统软件源脚本__ - #### __本项目旨在为从事计算机相关行业的朋友们提供便利__ -- #### __理论支持所有架构的环境，ARM64 环境已经过测试__ ## :fa-brands fa-linux: 适配系统 @@ -12,11 +11,11 @@  Debian - 8.0 ~ 11 + 8.0 ~ 12  Ubuntu - 16.04 ~ 23 + 14.04 ~ 23  Kali Linux @@ -53,7 +52,7 @@ > [!NOTE|label:说明] -> 当前支持上述基于 Debian、RedHat、openEuler、openSUSE 的发行版和及其部分衍生版本，不再此支持范围内的操作系统请勿运行本脚本 +> 当前支持上述基于 Debian、RedHat、openEuler、openSUSE 的发行版和及其部分衍生版本（点击列表中的图标可快速前往其官网），理论支持所有架构的环境，不在此支持范围内的操作系统或版本请勿运行本脚本 ## 使用方法 @@ -64,38 +63,37 @@ bash <(curl -sSL https://gitee.com/SuperManito/LinuxMirrors/raw/main/ChangeMirro - ### 注意事项 1. 完整复制上面的命令到终端按回车键即可执行，若无法安装 `curl` 软件包可复制源码到本地后通过 `bash` 手动执行 - 2. 为了适配所有环境，需要使用 `Root` 用户执行脚本，切换命令为 `su root` ，如遇报错请查看常见问题与帮助 + 2. 为了适配所有环境，需要使用 `Root` 用户执行脚本，切换命令为 `su root`，如遇报错请查看常见问题与帮助 3. 如果您使用的环境没有安装或不支持简体中文环境，请通过 `SSH客户端工具` 使用，否则将无法正确选择交互内容 4. 执行脚本过程中会自动备份原有源无需手动备份，期间会在终端输出多个主观选择交互内容，可按回车键快速确定 5. 脚本支持在原有源配置错误或者不存在的情况下使用，并且可以重复使用；脚本变更的软件源默认使用 `HTTP` 协议 - > [!WARNING|label:未启用的源] - > **Debian** 系 Linux 默认禁用了**源码仓库**和**预发布软件源**，若需启用请将 `/etc/apt/sources.list` 文件中相关内容的所在行**取消注释** - > **RedHat** 系 Linux 部分仓库**默认没有启用**，若需启用请将 `/etc/yum.repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1` - > **openEuler** 系 Linux 部分仓库**默认没有启用**，若需启用请将 `/etc/yum.repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1` - > **openSUSE** 系 Linux 部分仓库**默认没有启用**，若需启用请将 `/etc/zypp/repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1` + > [!WARNING|label:未启用的软件源] + > - **Debian** 系 Linux 默认禁用了源码仓库和预发布软件源，若需启用请将 `/etc/apt/sources.list` 文件中相关内容的所在行取消注释 + > - **RedHat**/**openEuler** 系 Linux 部分仓库默认没有启用，若需启用请将 `/etc/yum.repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1` + > - **openSUSE** 系 Linux 部分仓库默认没有启用，若需启用请将 `/etc/zypp/repos.d` 目录下相关 **repo** 文件中的 `enabled` 值修改为 `1` - ### 软件源 - | | 镜像站名称 | 镜像站地址 | IPv6 | Kali Linux | Rocky Linux | Fedora | openEuler | openSUSE | EPEL | - | :---: | :---------------: | :------------------------------------------------------------------: | :---: | :--------: | :---------: | :----: | :-------: | :------: | :---: | - | 1 | 阿里云 | [mirrors.aliyun.com](https://mirrors.aliyun.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | - | 2 | 腾讯云 | [mirrors.tencent.com](https://mirrors.tencent.com) | ✓ | ✓ | ✓ | ✓ | | ✓ | ✓ | - | 3 | 华为云 | [mirrors.huaweicloud.com](https://mirrors.huaweicloud.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | - | 4 | 网易 | [mirrors.163.com](https://mirrors.163.com) | | | ✓ | ✓ | ✓ | | | - | 5 | 搜狐 | [mirrors.sohu.com](https://mirrors.sohu.com) | | | | ✓ | | ✓ | | - | 6 | 清华大学 | [mirrors.tuna.tsinghua.edu.cn](https://mirrors.tuna.tsinghua.edu.cn) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | - | 7 | 北京大学 | [mirrors.pku.edu.cn](https://mirrors.pku.edu.cn/Mirrors) | ✓ | | | | ✓ | ✓ | ✓ | - | 8 | 浙江大学 | [mirrors.zju.edu.cn](https://mirrors.zju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 9 | 南京大学 | [mirrors.nju.edu.cn](https://mirrors.nju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 10 | 重庆大学 | [mirrors.cqu.edu.cn](https://mirrors.cqu.edu.cn) | | ✓ | | ✓ | | ✓ | ✓ | - | 11 | 兰州大学 | [mirror.lzu.edu.cn](https://mirror.lzu.edu.cn) | ✓ | | ✓ | ✓ | ✓ | ✓ | ✓ | - | 12 | 上海交通大学 | [mirror.sjtu.edu.cn](https://mirror.sjtu.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 13 | 哈尔滨工业大学 | [mirrors.hit.edu.cn](https://mirrors.hit.edu.cn) | ✓ | ✓ | | | ✓ | ✓ | ✓ | - | 14 | 中国科学技术大学 | [mirrors.ustc.edu.cn](https://mirrors.ustc.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - | 15 | 中国科学院软件研究所 | [mirror.iscas.ac.cn](https://mirror.iscas.ac.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | | 镜像站名称 | 镜像站地址 | IPv6 | Kali | Rocky | Fedora | openEuler | openSUSE | EPEL | + | :---: | :---------------: | :------------------------------------------------------------------: | :--: | :--: | :---: | :----: | :-------: | :------: | :--: | + | 1 | 阿里云 | [mirrors.aliyun.com](https://mirrors.aliyun.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | + | 2 | 腾讯云 | [mirrors.tencent.com](https://mirrors.tencent.com) | ✓ | ✓ | ✓ | ✓ | | ✓ | ✓ | + | 3 | 华为云 | [mirrors.huaweicloud.com](https://mirrors.huaweicloud.com) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | + | 4 | 网易 | [mirrors.163.com](https://mirrors.163.com) | | | ✓ | ✓ | ✓ | | | + | 5 | 搜狐 | [mirrors.sohu.com](https://mirrors.sohu.com) | | | | ✓ | | ✓ | | + | 6 | 清华大学 | [mirrors.tuna.tsinghua.edu.cn](https://mirrors.tuna.tsinghua.edu.cn) | ✓ | ✓ | | ✓ | ✓ | ✓ | ✓ | + | 7 | 北京大学 | [mirrors.pku.edu.cn](https://mirrors.pku.edu.cn/Mirrors) | ✓ | | | | ✓ | ✓ | ✓ | + | 8 | 浙江大学 | [mirrors.zju.edu.cn](https://mirrors.zju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 9 | 南京大学 | [mirrors.nju.edu.cn](https://mirrors.nju.edu.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 10 | 重庆大学 | [mirrors.cqu.edu.cn](https://mirrors.cqu.edu.cn) | | ✓ | | ✓ | | ✓ | ✓ | + | 11 | 兰州大学 | [mirror.lzu.edu.cn](https://mirror.lzu.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 12 | 上海交通大学 | [mirror.sjtu.edu.cn](https://mirror.sjtu.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 13 | 哈尔滨工业大学 | [mirrors.hit.edu.cn](https://mirrors.hit.edu.cn) | ✓ | ✓ | | | ✓ | ✓ | ✓ | + | 14 | 中国科学技术大学 | [mirrors.ustc.edu.cn](https://mirrors.ustc.edu.cn) | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | + | 15 | 中国科学院软件研究所 | [mirror.iscas.ac.cn](https://mirror.iscas.ac.cn) | | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | - 以上为脚本当前使用的开源镜像站，所有镜像站均支持 `Debian` `Ubuntu` `CentOS` 软件源 + 以上为脚本默认使用的镜像站，上述所有镜像站均支持 `Debian` `Ubuntu` `CentOS` 软件源，列表根据单位性质、地理位置、名称长度进行排序，与实际速度无关 华北地区建议优先使用 `中科大`、`腾讯云`、`清华大学`，软件源的速度区分刷新速度和下载速度，具体请结合实际地理位置进行选择尝试 > [!TIP] @@ -139,13 +137,13 @@ bash <(curl -sSL https://gitee.com/SuperManito/LinuxMirrors/raw/main/ChangeMirro - ### 脚本执行流程 - - └ 选择国内源 `交互` - - └ 检测如果是 RHEL或CentOS 系统选择是否安装/覆盖 EPEL 扩展国内源 `交互` + - └ 选择软件源 `交互` + - └ 检测如果是 RHEL或CentOS 系统选择是否安装/覆盖 EPEL 扩展软件源 `交互` - └ 选择软件源使用的 WEB 协议 `交互` - └ 检测 防火墙 和 SELINUX 如果开启并且系统是 RHEL或CentOS 选择是否关闭 `交互` - └ 备份原有源 - └ 检测如果存在重复的备份文件选择是否覆盖 `交互` - - └ 更换国内源 + - └ 更换软件源 - └ 选择是否更新软件包 `交互` - └ 选择是否清理已下载的软件包缓存 `交互` @@ -161,9 +159,11 @@ bash <(curl -sSL https://gitee.com/SuperManito/LinuxMirrors/raw/main/ChangeMirro > `Docker CE` Docker Community Edition 镜像仓库，用于下载并安装 Docker 相关软件包。 > `Docker Hub` Docker Hub 镜像仓库，默认为官方提供的公共库，用于切换下载镜像时的来源仓库，又称镜像加速器。 - 脚本集成安装 `Docker Engine`，可手动选择安装版本、下载源、镜像加速器，支持国内外服务器环境和 `ARM` 架构处理器环境使用 + 脚本集成安装 `Docker Engine`，可手动选择安装版本、下载源、镜像加速器，支持海内外服务器环境和 `ARM` 架构处理器环境使用 *** -项目已设立开源许可协议，传播时需在显著位置标注来源和作者，请尊重作者的知识成果 -建议通过命令直接调用脚本，如有意见与建议您可以提交至 [Issues](https://github.com/SuperManito/LinuxMirrors/issues) +项目已设立开源许可协议，传播时请在显著位置标注来源和作者，请尊重作者的知识成果，建议通过命令直接调用脚本 +如有意见与建议您可以提交至 [Issues](https://github.com/SuperManito/LinuxMirrors/issues)，如果您需要提交您的代码，请前往 GitHub 仓库提交 [Pull Requests](https://github.com/SuperManito/LinuxMirrors/pulls) + +*** diff --git a/docs/_coverpage.md b/docs/_coverpage.md index 0ba7987..7d90726 100644 --- a/docs/_coverpage.md +++ b/docs/_coverpage.md @@ -1,5 +1,6 @@ -# ![LinuxMirrors](./img/logo.png) - + +
+
脚本一键更换 Linux 软件源
让换源更简单
diff --git a/docs/index.html b/docs/index.html index 70083f3..441ffd7 100644 --- a/docs/index.html +++ b/docs/index.html @@ -62,7 +62,7 @@ footer: { style: 'text-align: center; font-size: 16px; line-height: 1.5; margin-top: 1.5em; color: var(--sidebarSublinkColor)', copy: 'Copyright 2021 ~ 2023 SuperManito
', - auth: 'Released under the GPL-2.0 . Website built with Docsify' + auth: 'Released under the MIT . Website built with Docsify' }, // 选项卡