mayfly-go/devops/machine/shell/sys_info.sh

#!/bin/bash
# func:sys info check
[ $(id -u) -ne 0 ] && echo "请用root用户执行此脚本！" && exit 1
sysversion=$(rpm -q centos-release | cut -d- -f3)
line="-------------------------------------------------"
# 获取系统cpu信息
function get_cpu_info() {
  Physical_CPUs=$(grep "physical id" /proc/cpuinfo | sort | uniq | wc -l)
  Virt_CPUs=$(grep "processor" /proc/cpuinfo | wc -l)
  CPU_Kernels=$(grep "cores" /proc/cpuinfo | uniq | awk -F ': ' '{print $2}')
  CPU_Type=$(grep "model name" /proc/cpuinfo | awk -F ': ' '{print $2}' | sort | uniq)
  CPU_Arch=$(uname -m)
  cpu_usage=$(cat /proc/stat | awk '/cpu/{printf("%.2f%\n"), ($2+$4)*100/($2+$4+$5)}' | awk '{print $0}' | head -1)
  #echo -e '\033[32m CPU信息：\033[0m'
  echo -e ' CPU信息：'
  cat <<EOF | column -t
物理CPU个数: $Physical_CPUs
逻辑CPU个数: $Virt_CPUs
每CPU核心数: $CPU_Kernels
CPU型号: $CPU_Type
CPU架构: $CPU_Arch
CPU使用率: $cpu_usage
EOF
}

# 获取系统内存信息
function get_mem_info() {
  Total=$(free -m | sed -n '2p' | awk '{print $2"M"}')
  Used=$(free -m | sed -n '2p' | awk '{print $3"M"}')
  Rate=$(free -m | sed -n '2p' | awk '{print""($3/$2)*100"%"}')
  echo -e ' 内存信息：'
  cat <<EOF | column -t
内存总容量：$Total
内存已使用：$Used
内存使用率：$Rate
EOF
}

# 获取系统网络信息
function get_net_info() {
  pri_ipadd=$(ifconfig | awk 'NR==2{print $2}')
  #pub_ipadd=$(curl ip.sb 2>&1)
  pub_ipadd=$(curl -s http://ddns.oray.com/checkip | awk -F ":" '{print $2}' | awk -F "<" '{print $1}' | awk '{print $1}')
  gateway=$(ip route | grep default | awk '{print $3}')
  mac_info=$(ip link | egrep -v "lo" | grep link | awk '{print $2}')
  dns_config=$(egrep 'nameserver' /etc/resolv.conf)
  route_info=$(route -n)
  echo -e ' IP信息：'
  cat <<EOF | column -t
系统公网地址: ${pub_ipadd}
系统私网地址: ${pri_ipadd}
网关地址: ${gateway}
MAC地址: ${mac_info}
路由信息:
${route_info}
DNS 信息:
${dns_config}
EOF
}

# 获取系统磁盘信息
function get_disk_info() {
  disk_info=$(fdisk -l | grep "Disk /dev" | cut -d, -f1)
  disk_use=$(df -hTP | awk '$2!="tmpfs"{print}')
  disk_inode=$(df -hiP | awk '$1!="tmpfs"{print}')
  echo -e ' 磁盘信息：'
  cat <<EOF
${disk_info}
磁盘使用:
${disk_use}
inode信息:
${disk_inode}
EOF
}

# 获取系统信息
function get_systatus_info() {
  sys_os=$(uname -o)
  sys_release=$(cat /etc/redhat-release)
  sys_kernel=$(uname -r)
  sys_hostname=$(hostname)
  sys_selinux=$(getenforce)
  sys_lang=$(echo $LANG)
  sys_lastreboot=$(who -b | awk '{print $3,$4}')
  sys_runtime=$(uptime | awk '{print  $3,$4}' | cut -d, -f1)
  sys_time=$(date)
  sys_load=$(uptime | cut -d: -f5)
  echo -e ' 系统信息：'
  cat <<EOF | column -t
系统: ${sys_os}
发行版本:   ${sys_release}
系统内核:   ${sys_kernel}
主机名:    ${sys_hostname}
selinux状态:  ${sys_selinux}
系统语言:   ${sys_lang}
系统当前时间: ${sys_time}
系统最后重启时间:   ${sys_lastreboot}
系统运行时间: ${sys_runtime}
系统负载:   ${sys_load}
---------------------------------------
EOF
}

# 获取服务信息
function get_service_info() {
  port_listen=$(netstat -lntup | grep -v "Active Internet")
  kernel_config=$(sysctl -p 2>/dev/null)
  if [ ${sysversion} -gt 6 ]; then
    service_config=$(systemctl list-unit-files --type=service --state=enabled | grep "enabled")
    run_service=$(systemctl list-units --type=service --state=running | grep ".service")
  else
    service_config=$(/sbin/chkconfig | grep -E ":on|:启用" | column -t)
    run_service=$(/sbin/service --status-all | grep -E "running")
  fi
  echo -e ' 服务启动配置：'
  cat <<EOF
${service_config}
${line}
运行的服务:
${run_service}
${line}
监听端口:
${port_listen}
${line}
内核参考配置:
${kernel_config}
EOF
}

function get_sys_user() {
  login_user=$(awk -F: '{if ($NF=="/bin/bash") print $0}' /etc/passwd)
  ssh_config=$(egrep -v "^#|^$" /etc/ssh/sshd_config)
  sudo_config=$(egrep -v "^#|^$" /etc/sudoers | grep -v "^Defaults")
  host_config=$(egrep -v "^#|^$" /etc/hosts)
  crond_config=$(for cronuser in /var/spool/cron/*; do
    ls ${cronuser} 2>/dev/null | cut -d/ -f5
    egrep -v "^$|^#" ${cronuser} 2>/dev/null
    echo ""
  done)
  echo -e ' 系统登录用户：'
  cat <<EOF
${login_user}
${line}
ssh 配置信息:
${ssh_config}
${line}
sudo 配置用户:
${sudo_config}
${line}
定时任务配置:
${crond_config}
${line}
hosts 信息:
${host_config}
EOF
}

function process_top_info() {
  top_title=$(top -b n1 | head -7 | tail -1)
  cpu_top10=$(top b -n1 | head -17 | tail -10)
  mem_top10=$(top -b n1 | head -17 | tail -10 | sort -k10 -r)
  echo -e ' CPU占用top10：'
  cat <<EOF
${top_title}
${cpu_top10}
EOF
  echo -e ' 内存占用top10：'
  cat <<EOF
${top_title}
${mem_top10}
EOF
}

function sys_check() {
  get_systatus_info
  echo ${line}
  get_cpu_info
  echo ${line}
  get_mem_info
  echo ${line}
  #    get_net_info
  #    echo ${line}
  get_disk_info
  echo ${line}
      get_service_info
      echo ${line}
#  get_sys_user
#  echo ${line}
  process_top_info
}

sys_check